News
1
3
2
Home > News >The company news

Strontium Tungstate : The Powder Behind a Raman Crystal

2026-11-19  read:5

Basic Material Parameters

Strontium tungstate (SrWO4) is a scheelite-type tetragonal crystal with CAS No. 13451-05-3. It has a relative molecular mass of 335.46, a density of approximately 6.3 g/cm3, and a melting point of approximately 1,540°C. It is insoluble in water and chemically stable. Like calcium tungstate and barium tungstate, it belongs to the scheelite structural family. Its unit-cell parameters are a = b = 5.417nm and c = 11.951nm.

Value as a Raman Crystal

SrWO4 is perhaps best known for its role as a Raman crystal. It has a Raman shift of approximately 921 cm-1 and a linewidth of approximately 2.7 cm-1. At 1064 nm, its Raman gain is approximately 5.0 cm/GW, and its damage threshold can reach the GW/cm2 range. These properties enable established laser wavelengths to be extended into the ultraviolet-to-mid-infrared range, making SrWO4 useful in Raman lasers and LiDAR systems. Since the Raman shift is determined by lattice vibrations, it is generally highly consistent among crystals from the same batch.

Key Influences of Raw Powder

Behind the crystal lies the powder. As a raw material for crystal growth, SrWO4 powder must meet requirements for purity, the strontium-to-tungsten stoichiometric ratio, and particle size distribution, all of which can affect inclusions, optical homogeneity, and crystal yield. As a precursor for luminescent material matrices and ceramic powders, it likewise requires consistent phase purity and good dispersibility. Its specific surface area and degree of agglomeration can also influence crucible loading and melting behavior.

Core Production Challenges: Stoichiometry and Impurity-Phase Control

The main challenges lie in stoichiometric control and impurity phases. Deviations in the amounts of strontium and tungsten sources added during processing directly affect the chemical stoichiometry. Residual unreacted strontium carbonate, elevated sodium and potassium impurity levels, and agglomerated particles can all have amplified effects during high-temperature crystal growth or sintering. For powder suppliers, an Sr/W ratio close to 1 is often a more meaningful indicator of quality than nominal purity alone. Such deviations may not be reflected in the test certificate, but they can ultimately show up in the yield of the finished product.

About Guangxi Titan New Material Technology Co., Ltd.

To address these requirements, Guangxi Titan New Material Technology Co., Ltd. can provide tailored powder solutions. As a core enterprise in the Group‘s advanced and critical materials sector, the company specializes in custom synthesis of metal-based compounds, with fine inorganic chemicals and organometallic compounds as its main products, serving industries including new energy, optoelectronics, semiconductors, and biomedical materials. Leveraging its joint laboratories, Advanced Ceramic Materials R&D Center, and pilot-scale platforms, the company can customize products in terms of the strontium-to-tungsten stoichiometric ratio, phase purity, particle size, and morphology. Through staged validation from laboratory-scale development to pilot-scale development and mass production, the powder can be tailored to align with customers‘ crystal growth or sintering processes.

Guangxi Titan continues to advance its global presence, with production bases in Vietnam, the United States, Brazil, and other locations. The company also uses a B2B new materials platform to showcase products, handle inquiries, and facilitate the matching of supply and demand.

If you are looking for strontium tungstate powder for Raman devices or luminescent materials, we welcome you to connect with the Guangxi Titan technical team. Starting with a set of specifications, we can work together to develop powder that matches your process requirements.